Nukeproof Horizon V2 Freehub Body 102tThis freehub body is engineered for directly replacing the freehub body that comes with Nukeproof Horizon V2 hubs. It features a hard-wearing alloy construction, which makes it ideal at handling all the abuse that’s associated with fast and intense MTB rides. Perfect for replacing your old or worn-out existing freehub body, it allows for quick and easy installation.Please Note: This freehub is only compatible with Nukeproof Horizon V2 hubs.Options: Shimano HG Shimano Microspline SRAM XDA new hub seal and bushing is supplied with Nukeproof freehubs.Microspline freehubs also include the driveside end cap so you can easily convert an HG / XD hub to microspline.If you are converting a microspline hub to XD or HG, you will also require a new driveside end cap.FreehubsInstallation Instructions:1. Remove driveside end cap2. Pull off old freehub turning anticlockwise as you pull3. Check hub seal for damage, if it is damaged remove the seal4. If seal was removed, press on new seal5. Apply grease hub ratchet ring6. Apply thin grease to freehub pawls & springs then push onto hub shell turning anticlockwise7. Refit driveside end capFeatures: Material: Alloy Pawl: 6-Pawl Hub Compatibility: Horizon V2 Cassette Compatibility: Shimano HG – 9, 10, 11 and 12 Shimano HG spline cassettes; SRAM XD – SRAM Eagle XD cassettes and Shimano Microspline – Shimano microspline cassettes Points of Engagement: 102 Nukeproof Part Numbers: Shimano HG Freehub: NUKHORV2102TFHHG; SRAM XD Freehub: NUKHORV2102TFHXD and Shimano Microspline Freehub: NUKHORV2102TFHMSBuy Nukeproof Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.