Fox Suspension 34 Float Performance Grip ForkPart of Fox Suspension’s Performance Series, this mountain bike (MTB) suspension fork features a high-quality anodised finish on its upper tubes for extra durability as well as protection against corrosion during wet riding conditions. Offering a wide range of adjustment features, it comes kitted out with a Float EVOL air spring and a GRIP damper with three-position on-the-fly adjustability. This makes it straightforward to set it up to match your riding style as well as the terrain. Coming complete with a range of performance-enhancing technologies for smoother and stiffer performance, this versatile fork is in a class of its own.Trail-Ready MTB Fork with Float EVOL Air SpringReturning with the same legendary suppleness and longevity, the EVOL air spring in 34’s now has an enlarged negative air spring to assist with mid-stroke support.FIT GRIP 3-Position DamperInspired from moto, the GRIP damper uses Fox Suspension’s FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability.Features: Upper Tubes Finish: Anodised Use: MTB Axle Size: 15QRx110mm Damper: GRIP 3-position Air Spring: Float EVOL Adjustments: Compression (Open, Medium, Firm), additional micro-adjust between settings Detents and Low-speed rebound Steerer Diameter: 1.5" tapered Fork Travel: 140mm Rake: 44mm Compatible Rotor Size: 180mm direct Post Mount Starting Weight: 1738gTechnologies: Performance Series: Performance Series forks retain the same black anodized 7000 series aluminium upper tubes as Performance Elite, except paired with a GRIP damper. Push-button bleeders are not included but can be purchased separately. Adjustments: Three on-the-fly compression damping positions Open, Medium, Firm. Additional micro-adjust between settings Detents. Low-speed rebound 10 clicks. Lower Leg Bypass Channels: As a fork compresses, the air volume within the lower legs decreases, increasing air pressure. The more the fork compresses, the more pressure increases. This effect can have the unintended consequence of preventing full travel from being achieved. Fox Suspension’s lower leg channels help alleviate this issue by dramatically increasing air volume within the lower legs and thereby reducing the amount of additional unintended pressure ramping. Another benefit of these channels is that lower leg bath oil is circulated to the upper reaches of the lower legs, continuously lubricating the foam rings and bushings as the fork compresses and extends through its travel. Lower Leg Arch: Stiffness-to-weight is the ultimate metric for bicycle design. Engineers invest countless hours poring over every ounce of material in an effort to optimize this critical ratio. The all-new 34 pulls out all the stops, shaving every possible gram while making sure not to compromise the stiffness or strength requirements of modern trail riding. Modern frame designs and geometry trends require modern suspension design solutions. The arch design is designed to pair perfectly with modern trail bikes. Head tube profiles have grown larger and larger, and fork offsets shorter and shorter. Fox Suspension’s new arch shape takes this need into account by jutting forward to provide ample headtube clearance at full compression. State-of-the-art computer modeling techniques helped us to create an organic lower leg shape that optimizes stiffness with the absolute minimal amount of material.Manufacturer’s Part Number: 910-21-000 Black 29" QR110 140mm 44mmBuy Fox Suspension Components from Chain Reaction Cycles, the World’s Largest Online Bike Store.
